Please note that a member of staff will make time exclusively for you, so appointments can only be canceled free of charge up to 48 hours in advance. After that, we will unfortunately have to charge 50% of the analysis price.
Premium customers of the Triathlonwerkstatt receive a 5% discount on a Bikefitting-Plus.
Bikefitting-Plus
Analysis € 399,-
Optional: Bike insoles starting at €199 | Optional: gebioMized saddle starting at €199 | Optional: AI-supported + € 35,-
Optional: Bike insoles starting at €199 | Optional: gebioMized saddle starting at €199 | Optional: AI-supported + € 35,-
Duration: 2-2,5 h
Target group: road bikes, gravel bikes, triathlon bikes
Available at: Sportmotorik Wien
With our Bikefitting Plus package, you receive an analysis and package of measures compiled by our experts covering the following topics:
- Focus on Asymmetries, Leg-Length Discrepancies, and Pelvic Tilt
- Recognize incorrect loads when cycling & incorrect bike settings
- High-tech analysis for seat, knee angle & inner shoe pressure
- Production of bike insoles for better power transmission
- Pain in the back & spine area
Package scope
Analysis
digital foot scan
The foot is scanned barefoot on a glass plate while standing using a 2D scanner in order to obtain information about the skin condition and the load-bearing surface of the foot. Furthermore, any misalignments and incorrect loading can be detected.
Analysis
Video analysis bike lab
The bike is clamped into a roller trainer and you are filmed simultaneously by three cameras while riding. This allows the knee and seat angle to be precisely determined and any pain or problems to be eliminated by changing the settings on the bike.
Analysis
Inner shoe measurement Cycling
By inserting pressure measuring insoles, thin insoles with over 100 pressure measuring points, pressure conditions in the shoe can be precisely determined while cycling. The power transmission from the shoe to the pedal is checked and any losses can be compensated for using custom-made cycling insoles.
Analysis
Saddle pressure measurement
Here, a pressure measurement foil with pressure measurement sensors is stretched over the bike saddle in order to measure all loads and pressure points while cycling and to be able to compare the results if the settings are changed. The collected pressure images can also serve as a basis for recommending other saddles.
Analysis
Compensating for Leg-Length Discrepancies
We determine whether there is a leg-length discrepancy that should be corrected on the bike. If a discrepancy is suspected, both leg extensions are analyzed, and compensation can be achieved using a cleat stacker. The leg extensions are then analyzed again, and if necessary, the process is repeated with a greater compensation until other asymmetrical parameters also improve.
Analysis
Seat bone distance measurement
The distance between the ischial tuberosities is of immense importance for cycling and is digitally recorded and calculated by our systems within seconds and is available for selecting the optimum saddle.
Analysis
Bicycle biometrics large
First, all existing bike settings such as seat height, seat angle and handlebar width are measured and put into protocol. After the video analysis and pressure measurements, the settings are changed/adjusted if necessary to avoid pain or improve performance. These settings are checked again with a video and a pressure measurement. If needed, the adjustments and measurements are repeated several times.
Analysis
Posture analysis / back scan
The back is measured three-dimensionally within a few seconds and the result is displayed visually on the screen. Misalignments are immediately visible and receptors (small plates) are placed under the feet at precisely defined points, triggering the body’s own reflex in the muscles to restore the optimal position.
Analysis
Body balance
Measuring the body balance determines the symmetry of the posture (the body is perpendicular). This can prevent one-sided joint strain and premature wear and tear in the long term. Body statics are also checked.
Information on
Movement exercises
If incorrect posture, misalignment or incorrect loading is detected, coordinated videos of movement exercises are provided to achieve an optimal result, preferably in combination with sensomotoric insoles.
Analysis
Results / Report of the analysis
All measurements, wheel settings, recommendations and all analyses, pressure measurements and videos (comparison start to finish) are digitized, including the report, as results and made available by email so that they can be viewed again later or discussed with physiotherapists or doctors if necessary.
Manufacturing & customization
Bike Insoles
Extra thin, extra light to fit inside the cycling shoe, for better power transmission to the pedal and as support for foot problems and misalignments. Naturally also made to measure.
Included
Re-Check Bike Package
The bike re-check is included in this package. You can find more information here.
“Our aim is to use sports orthopaedic measures to optimize movement sequences and eliminate pain. Sport and exercise become a pleasure again.”
Katharina, Sportmotorik & Orthopaedics
Book an Appointment
Simply fill out the form. We will get in touch with you to arrange an appointment.
You are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information